.png){kind=logo}
pearson-200-301-complete
Cisco CCNA (200-301)
Fast-track your Cisco certification with the CCNA 200-301 Official Cert Guide published by Pearson on uCertify.
- Practice in 69 Hands-On Labs — nothing to install
- 66 Interactive Lessons and 255 topics mapped to the official exam objectives
- 1205 Practice Test Questions and 2 Full Length Tests
Beginner Self-paced · 1 year access 4.8/5 (309 Reviews)
69 Hands-On LiveLabs
Practice real IT tasks in guided environments.
- Real environments
- Auto-graded
- No installation
66Interactive Lessons
255Topics
69LiveLab
1205Practice Test Questions
20Videos
542Flashcards
542Glossary of terms
01 / Skills you'll get
What you will be able to do
Try Free →
No credit card required
This uCertify courseware prepares you for the Cisco Certified Network Associate (CCNA) 200-301 exam, a foundational certification validating your competence in core networking concepts. This training course covers all exam objectives, including hands-on skills in Ethernet LANs, command-line interface (CLI), LAN switching, networking protocols, subnetting, and more. Go beyond rote memorization with real-world scenarios and learning resources that solidify your understanding.
- Grasp core concepts of network topologies, IP addressing, and protocols.
- Navigate and utilize Cisco device command-line interfaces (CLI).
- Design and configure Ethernet Local Area Networks (LANs).
- Understand and implement LAN switching technologies.
- Gain a foundation in routing protocols for network traffic management.
- Master the art of dividing IP networks into subnets.
- Apply theoretical knowledge to solve practical networking scenarios.
Target Career Roles
- Help Desk Technician
- Network Support Technician
- Entry-level Network Engineer
02 / Lessons & labs
See exactly what you will learn and practice
Lessons
66 Interactive Lessons · 255 topics01 Introduction 2 topics +
- About Cisco Certifications and CCNA
- Course Organization, Lessons, and Appendixes
02 Introduction to TCP/IP Networking 4 topics · 11 LiveLab +
- Perspectives on Networking
- TCP/IP Networking Model
- Data Encapsulation Terminology
- Review All the Key Topics
11 LiveLab in this lesson — see the labs panel →
03 Fundamentals of Ethernet LANs 5 topics +
- An Overview of LANs
- Building Physical Ethernet LANs with UTP
- Building Physical Ethernet LANs with Fiber
- Sending Data in Ethernet Networks
- Review All the Key Topics
04 Fundamentals of WANs and IP Routing 4 topics · 2 LiveLab +
- Wide-Area Networks
- IP Routing
- Other Network Layer Features
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
05 Using the Command-Line Interface 4 topics · 5 LiveLab +
- Accessing the Cisco Catalyst Switch CLI
- Configuring Cisco IOS Software
- Command References
- Review All the Key Topics
5 LiveLab in this lesson — see the labs panel →
06 Analyzing Ethernet LAN Switching 4 topics · 1 LiveLab +
- LAN Switching Concepts
- Verifying and Analyzing Ethernet Switching
- Command References
- Review All the Key Topics
1 LiveLab in this lesson — see the labs panel →
07 Configuring Basic Switch Management 5 topics · 4 LiveLab +
- Securing the Switch CLI
- Enabling IPv4 for Remote Access
- Miscellaneous Settings Useful in the Lab
- Command References
- Review All the Key Topics
4 LiveLab in this lesson — see the labs panel →
08 Configuring and Verifying Switch Interfaces 4 topics · 2 LiveLab +
- Configuring Switch Interfaces
- Analyzing Switch Interface Status and Statistics
- Command References
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
09 Implementing Ethernet Virtual LANs 5 topics · 2 LiveLab +
- Virtual LAN Concepts
- VLAN and VLAN Trunking Configuration and Verification
- Troubleshooting VLANs and VLAN Trunks
- Command References
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
10 Spanning Tree Protocol Concepts 4 topics +
- STP and RSTP Basics
- Details Specific to STP (and Not RSTP)
- Rapid STP Concepts
- Review All the Key Topics
11 RSTP and EtherChannel Configuration 4 topics · 1 LiveLab +
- Understanding RSTP Through Configuration
- Configuring Layer 2 EtherChannel
- Command References
- Review All the Key Topics
1 LiveLab in this lesson — see the labs panel →
12 Perspectives on IPv4 Subnetting 5 topics +
- Introduction to Subnetting
- Analyze Subnetting and Addressing Needs
- Make Design Choices
- Plan the Implementation
- Review All the Key Topics
13 Analyzing Classful IPv4 Networks 3 topics · 3 LiveLab +
- Classful Network Concepts
- Practice with Classful Networks
- Review All the Key Topics
3 LiveLab in this lesson — see the labs panel →
14 Analyzing Subnet Masks 3 topics +
- Subnet Mask Conversion
- Identifying Subnet Design Choices Using Masks
- Review All the Key Topics
15 Analyzing Existing Subnets 5 topics +
- Defining a Subnet
- Analyzing Existing Subnets: Binary
- Analyzing Existing Subnets: Decimal
- Practice Analyzing Existing Subnets
- Review All the Key Topics
16 Operating Cisco Routers 4 topics · 3 LiveLab +
- Installing Cisco Routers
- Enabling IPv4 Support on Cisco Router Interfaces
- Command References
- Review All the Key Topics
3 LiveLab in this lesson — see the labs panel →
17 Configuring IPv4 Addresses and Static Routes 6 topics · 4 LiveLab +
- IP Routing
- Configuring IP Addresses and Connected Routes
- Configuring Static Routes
- IP Forwarding with the Longest Prefix Match
- Command References
- Review All the Key Topics
4 LiveLab in this lesson — see the labs panel →
18 IP Routing in the LAN 5 topics +
- VLAN Routing with Router 802.1Q Trunks
- VLAN Routing with Layer 3 Switch SVIs
- VLAN Routing with Layer 3 Switch Routed Ports
- Command References
- Review All the Key Topics
19 Troubleshooting IPv4 Routing 4 topics · 4 LiveLab +
- Problem Isolation Using the ping Command
- Problem Isolation Using the traceroute Command
- Telnet and SSH
- Review All the Key Topics
4 LiveLab in this lesson — see the labs panel →
20 Understanding OSPF Concepts 4 topics +
- Comparing Dynamic Routing Protocol Features
- OSPF Concepts and Operation
- OSPF Areas and LSAs
- Review All the Key Topics
21 Implementing OSPF 5 topics +
- Implementing Single-Area OSPFv2
- Using OSPFv2 Interface Subcommands
- Additional OSPFv2 Features
- Command References
- Review All the Key Topics
22 OSPF Network Types and Neighbors 4 topics +
- OSPF Network Types
- OSPF Neighbor Relationships
- Command References
- Review All the Key Topics
23 Fundamentals of IP Version 6 3 topics · 1 LiveLab +
- Introduction to IPv6
- IPv6 Addressing Formats and Conventions
- Review All the Key Topics
1 LiveLab in this lesson — see the labs panel →
24 IPv6 Addressing and Subnetting 3 topics +
- Global Unicast Addressing Concepts
- Unique Local Unicast Addresses
- Review All the Key Topics
25 Implementing IPv6 Addressing on Routers 4 topics · 2 LiveLab +
- Implementing Unicast IPv6 Addresses on Routers
- Special Addresses Used by Routers
- Command References
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
26 Implementing IPv6 Routing 5 topics · 2 LiveLab +
- Connected and Local IPv6 Routes
- Static IPv6 Routes
- The Neighbor Discovery Protocol
- Command References
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
27 Fundamentals of Wireless Networks 5 topics +
- Comparing Wired and Wireless Networks
- Wireless LAN Topologies
- Other Wireless Topologies
- RF Overview
- Review All the Key Topics
28 Analyzing Cisco Wireless Architectures 5 topics +
- Autonomous AP Architecture
- Cloud-based AP Architecture
- Split-MAC Architectures
- Comparing Wireless LAN Controller Deployments
- Review All the Key Topics
29 Securing Wireless Networks 6 topics +
- Anatomy of a Secure Connection
- Wireless Client Authentication Methods
- Wireless Privacy and Integrity Methods
- WPA, WPA2, and WPA3
- Lesson Review
- Review All the Key Topics
30 Building a Wireless LAN 5 topics +
- Connecting a Cisco AP
- Accessing a Cisco WLC
- Connecting a Cisco WLC
- Configuring a WLAN
- Review All the Key Topics
31 Appendix A: Numeric Reference Tables +
32 Appendix B: Study Planner +
33 Appendix C: Topics from Previous Editions 5 topics +
- IPv4 Address Types
- Bandwidth and Clock Rate on Serial Interfaces
- Using traceroute to Isolate the Problem to Two Routers
- Troubleshooting Static IPv6 Routes
- Default Routes with SLAAC on Router Interfaces
34 Appendix D: Analyzing Ethernet LAN Designs 3 topics +
- Analyzing Collision Domains and Broadcast Domains
- Analyzing Campus LAN Topologies
- Analyzing LAN Physical Standard Choices
35 Appendix E: Subnet Design 2 topics +
- Choosing the Mask(s) to Meet Requirements
- Finding All Subnet IDs
36 Appendix F: Practice for Appendix E: Subnet Design 2 topics +
- Mask Design Practice Problems
- Practice Finding All Subnet IDs
37 Appendix G: Variable-Length Subnet Masks 3 topics +
- VLSM Concepts and Configuration
- Finding VLSM Overlaps
- Adding a New Subnet to an Existing VLSM Design
38 Appendix H: Spanning Tree Protocol Implementation 4 topics +
- Implementing STP
- Implementing Optional STP Features
- Implementing RSTP
- Command References
39 Appendix I: LAN Troubleshooting 4 topics +
- Troubleshooting STP
- Troubleshooting Layer 2 EtherChannel
- Analyzing the Switch Data Plane Forwarding
- Troubleshooting VLANs and VLAN Trunks
40 Appendix J: Troubleshooting IPv4 Routing Protocols 4 topics +
- Perspectives on Troubleshooting Routing Protocol Problems
- Interfaces Enabled with a Routing Protocol
- Neighbor Relationships
- Command References
41 Appendix K: Exam Topics Cross Reference 2 topics +
- CCNA 200-301 Exam Topic Order
- Course Lesson Order Versus CCNA 200-301 Exam Topics
42 Introduction 2 topics +
- About Cisco Certifications and CCNA
- Course Organization, Lessons, and Appendixes
43 Introduction to TCP/IP Transport and Applications 3 topics +
- TCP/IP Layer 4 Protocols: TCP and UDP
- TCP/IP Applications
- Review All the Key Topics
44 Basic IPv4 Access Control Lists 5 topics · 2 LiveLab +
- IPv4 Access Control List Basics
- Standard Numbered IPv4 ACLs
- Practice Applying Standard IP ACLs
- Command References
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
45 Advanced IPv4 Access Control Lists 4 topics +
- Extended Numbered IP Access Control Lists
- Named ACLs and ACL Editing
- Command References
- Review All the Key Topics
46 Security Architectures 5 topics · 5 LiveLab +
- Security Terminology
- Common Security Threats
- Controlling and Monitoring User Access
- Developing a Security Program to Educate Users
- Review All the Key Topics
5 LiveLab in this lesson — see the labs panel →
47 Securing Network Devices 4 topics · 2 LiveLab +
- Securing IOS Passwords
- Firewalls and Intrusion Prevention Systems
- Command References
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
48 Implementing Switch Port Security 4 topics · 3 LiveLab +
- Port Security Concepts and Configuration
- Port Security Violation Modes
- Command References
- Review All the Key Topics
3 LiveLab in this lesson — see the labs panel →
49 Implementing DHCP 4 topics · 2 LiveLab +
- Dynamic Host Configuration Protocol
- Identifying Host IPv4 Settings
- Command References
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
50 DHCP Snooping and ARP Inspection 4 topics · 1 LiveLab +
- DHCP Snooping
- Dynamic ARP Inspection
- Command References
- Review All the Key Topics
1 LiveLab in this lesson — see the labs panel →
51 Device Management Protocols 5 topics · 4 LiveLab +
- System Message Logging (Syslog)
- Network Time Protocol (NTP)
- Analyzing Topology Using CDP and LLDP
- Command References
- Review All the Key Topics
4 LiveLab in this lesson — see the labs panel →
52 Network Address Translation 5 topics · 2 LiveLab +
- Perspectives on IPv4 Address Scalability
- Network Address Translation Concepts
- NAT Configuration and Troubleshooting
- Command References
- Review All the Key Topics
2 LiveLab in this lesson — see the labs panel →
53 Quality of Service (QoS) 6 topics +
- Introduction to QoS
- Classification and Marking
- Queuing
- Shaping and Policing
- Congestion Avoidance
- Review All the Key Topics
54 Miscellaneous IP Services 5 topics · 1 LiveLab +
- First Hop Redundancy Protocol
- Simple Network Management Protocol
- FTP and TFTP
- Command References
- Review All the Key Topics
1 LiveLab in this lesson — see the labs panel →
55 LAN Architecture 4 topics +
- Analyzing Campus LAN Topologies
- Small Office/Home Office
- Power over Ethernet (PoE)
- Review All the Key Topics
56 WAN Architecture 4 topics +
- Metro Ethernet
- Multiprotocol Label Switching (MPLS)
- Internet VPNs
- Review All the Key Topics
57 Cloud Architecture 4 topics +
- Server Virtualization
- Cloud Computing Services
- WAN Traffic Paths to Reach Cloud Services
- Review All the Key Topics
58 Introduction to Controller-Based Networking 4 topics · 1 LiveLab +
- SDN and Controller-Based Networks
- Examples of Network Programmability and SDN
- Comparing Traditional Versus Controller-Based Networks
- Review All the Key Topics
1 LiveLab in this lesson — see the labs panel →
59 Cisco Software-Defined Access (SDA) 4 topics +
- SDA Fabric, Underlay, and Overlay
- DNA Center and SDA Operation
- DNA Center as a Network Management Platform
- Review All the Key Topics
60 Understanding REST and JSON 3 topics +
- REST-Based APIs
- Data Serialization and JSON
- Review All the Key Topics
61 Understanding Ansible, Puppet, and Chef 3 topics +
- Device Configuration Challenges and Solutions
- Ansible, Puppet, and Chef Basics
- Review All the Key Topics
62 Appendix A: Numeric Reference Tables +
63 Appendix B: Topics from Previous Editions 9 topics +
- Cisco Device Hardening
- Implementing DHCP
- Troubleshooting with IPv4 ACLs
- Implementing HSRP
- Gateway Load Balancing Protocol (GLBP)
- Implementing Simple Network Management Protocol
- Analyzing LAN Physical Standard Choices
- Metro Ethernet
- MPLS VPNs
64 Appendix C: Exam Topics Cross-Reference 2 topics +
- CCNA 200-301 Exam Topic Order
- Course Lessons, with Exam Topics Covered in Each
65 Appendix D: Study Planner +
66 Appendix E: Previous Edition ICND1 Lesson 35: Managing IOS Files 4 topics +
- Managing Cisco IOS Images and Upgrades
- Password Recovery
- Managing Configuration Files
- Command References
Hands-On Labs Our edge
69 LiveLabs- Obtaining Hardware Information of a Network Adapter
- Obtaining the IP Version of a Network Adapter
- Obtaining Information about Different IP Versions
- Obtaining Information about the Net Firewall Profile
- Getting the TCP Settings
- Getting Information about the Current Connection Statistics of TCP
- Getting Information about the TCP Ports
- Getting Information about the UDP Ports
- Getting the UDP Settings
- Getting Information about the Current Connection Statistics of UDP
- Getting Information about DNS
- Obtaining the ARP Cache
- Obtaining the IP Route Information from the IP Routing Table
- Demonstrating the Difference Between User and Enable (Privileged) Modes
- Enabling Password Security for CLI Access from the Console
- Using the show Command
- Demonstrating the Difference Between CLI Configuration Mode and EXEC Mode
- Configuring Submodes and Contexts
- Listing the Status of the Interfaces in a Switch
- Configuring Basic Passwords
- Configuring SSH in a Router
- Configuring IPv4 on a Switch
- Configuring a Switch to Learn its IP Address with DHCP
- Configuring and Displaying Speed, Duplex, and Description on a Switch
- Removing Various Configuration Settings
- Configuring VLAN
- Enabling and Disabling VLANs on a Switch
- Observing the STP Status
- Configuring a Class A IP Address
- Configuring a Class B IP Address
- Configuring a Class C IP Address
- Listing the Interfaces in a Router
- Configuring a Router
- Verifying IP Addresses on Cisco Routers
- Using the show IP route Command
- Displaying a Router’s IP ARP Table
- Configuring Static Routing
- Configuring Default Routing
- Pinging a Host Using a Router
- Pinging a Host Using a PC
- Using the traceroute Command
- Showing Telnet Login from R1 to R2 to View the Status of the Interface on R2
- Adding an IPv6 Address
- Configuring Static IPv6 Addresses on R1 and R2
- Configuring And Verifying NetFlow and NetFlow Data Export and Top Talkers
- Displaying IPv6 Routes
- Rejecting the ipv6 route Command with Link-Local and No Outgoing Interface
- Creating and Applying an ACL at the CLI Using Named Access List Configuration
- Adding to and Displaying a Numbered ACL Configuration
- Performing ARP Spoofing
- Spoofing MAC Address
- Performing a DDoS Attack Using cmd
- Using nslookup for Passive Reconnaissance
- Using dig for Passive Reconnaissance
- Encrypting IOS Passwords with the service password-encryption Command
- Encoding a Password as Type 5 (MD5)
- Creating a New VLAN and Placing Switch Ports into that VLAN
- Configuring Interfaces as Trunk Ports
- Configuring Port Fast and Rapid Spanning Tree
- Viewing the IP Address, Mask, and Default Router Settings on Windows
- Viewing the IP Address, Mask, and Default Router Settings on Linux
- Configuring DHCP Snooping
- Disabling the Timestamp and Enabling a Sequence Number in Log Messages
- Configuring Syslog and Viewing Settings on a Router
- Seeing Severity 3 and 5 Messages at the Console and Severity 3 Only in the Buffer
- Setting the Date, Time, Timezone, and Daylight Savings Time
- Configuring a CIDR-Based IP Network
- Configuring Network Address Translation
- Showing Cisco IOS File Systems Configuration on a Router
- Showing Small Output from a Switch Command
Labs run in your browser — nothing to install.
03 / Exam details
Cisco CCNA (200-301) Details
Gain the skills required to pass the Cisco CCNA certification exam with the CCNA (200-301) course and lab. The lab is versatile and delivers hands-on experience, replacing expensive physical labs. The CCNA course comprehensively covers the 200-301 exam objectives and provides knowledge in areas such as Ethernet LANs, command-line interface, LAN switching, networking protocols, subnets, and many more. This CCNA exam guide has learning resources to help you master the exam objectives with real-world scenarios.
Questions
100- 120
(per exam)
Duration
120 minutes
(per exam)
Passing Score
800-850
(on a scale of 1000)
Exam Fee
USD 300
(per exam)
Delivered by
Pearson VUE
(in-person or online)
Question Format
Simlet Testlet Simulation Drag-and-drop...
single/multiple choice, performance-based
Practice Tests
1205 Practice Questions
(mapped to official exam objectives)
Certification
pearson-200-301-complete
Cisco credential
Ready to take the exam?
Add your official pearson-200-301-complete exam voucher to your order.
Official Voucher · Fast delivery · Retake bundle available
Exam voucher is sold separately and not included with standard course.
04 / FAQs
Questions before you start
Is Cisco CCNA 200-301 hard?+
The Cisco CCNA 200-301 certification covers a wide range of networking fundamentals, including newer areas like automation. This can be challenging, but with a solid study plan you can succeed.
What is the pass score for CCNA 200-301?+
Cisco doesn't reveal the exact passing score. They use a scaled system, so it can vary slightly. However, most sources estimate it's around 825 out of 1000.
How much does the CCNA 200-301 exam cost?+
The exam fee is USD 300, plus any taxes or additional fees depending on your location.
How many questions are there in the CCNA 200-301 exam+
You can expect around 100-120 questions in the CCNA 200-301 exam.
Is CCNA easy to pass?+
The difficulty depends on your background. However, with focused studying and practice, you can significantly increase your chances of passing.
How long is CCNA 200-301 valid for?+
The CCNA 200-301 certification is valid for 3 years. To maintain it, you'll need to pass a continuing education exam or recertify for the latest version of the CCNA exam.
What are the prerequisites for this exam?+
There is no formal requirements for taking the new exam. However, Cisco recommends that the candidate should have:
- An understanding of all exam topics
- Good grasps of network fundamentals
- One or more years of experience with computer networking and Cisco equipments
What is the exam registration fee?+
USD 300
Where do I take the exam?+
What is the format of the exam?+
- Simlet
- Testlet
- Simulation
- Drag-and-drop
- Fill-in-the-blank
- Multiple choice (single and multiple answers)
How many questions are asked in the exam?+
The exam contains 100- 120 questions.
What is the duration of the exam?+
120 minutes
What is the passing score?+
800-850
(on a scale of 300-1000)
What is the exam's retake policy?+
The policies for retaking exams are as follows:
- Candidates who fail an Associate, Professional, or Specialist exam must wait a period of five (5) calendar days, beginning the day after the failed attempt, before they may retest for the same exam.
- Candidates who fail any Cisco Certified Internetwork Experts (CCIE) certification or Cisco Certified Design Expert (CCDE) written exam must wait for a period of 15 calendar days, beginning the day after the failed attempt, before retaking the same exam.
- Once passed, a candidate must wait a minimum of 180 days before taking the same exam with an identical exam number.
- Candidates who violate these policies are in violation of the agreement. Such conduct is strictly prohibited as described in the Cisco certification and confidentiality agreement.
Where can I find more information about this exam?+
Launch Your Cisco Career Today!
Upgrade your project management skills with Prince2 to give your career the much needed push.
- 1 year of full access
- 69 LiveLab included
- Certificate of completion
No credit card required